Solvent Distillers DIstatic serie

The units of the DIstatic serie, with capacity of 7 - 12 - 15 - 30 - 60 - 120 - 160 - 230 litres are distillers which allow the recycling and the re-use of degreasing and washing solvents. Through a simple distillation process, they separate the contaminants (resins, polymers, pigments, paints, oils, etc.) from the original solvent.
The boiling of the solvent is accomplished by a peripheral heating jacket filled with diathermic oil, heated by an electrical element. The vapours are then convoyed to a condenser cooled by air or water. The condensed solvent is collected in a tank, for its reuse. The contaminants remain as a residue inside a disposable bag named "Rec-Bag" ; in case of liquid residue, by tilting the unit itself. The distilled solvent characteristics are not altered by the distillation process, which can be carried on repeatedly.The DIstatic serie can be connected to a vacuum unit, suitable for high boiling solvents or for those flammable ones which have a close boiling point and flash point. The vacuum module can be equipped with an air operated vacuum pump or an electrical vacuum according to the need.
 
15 litres plant 30 litres plant 120 litres plant
 

 

 

 

Model Loading capacity (litres) Processing time (hours) Protection
Flammable solvents
Not flammable solvents
Dimensions (cm)
Weight (kg)
Si 7 A (Ax) 7 2.30 - 3.30 AD-T IP44 * • 55 x 65 x h115 40
Si 12 A (Ax) 12 3.30 - 4.30 AD-T IP44 * • 55 x 65 x h130 54
Di 15 A (Ax) 15 3.30 - 4.30 Atex II2G IIA T3 to T2 • • 63 x 73 x h145 67
Si 30 A (Ax) 30 3.30 - 4.30 AD-T IP44 * • 60 x 99 x h116 110
Di 30 A (Ax) 30 3.30 - 4.30 Atex II2G IIA T3 to T2 • • 60 x 99 x h116 142
Si  60 A (Ax) 60 3.30 - 4.30 AD-T IP44 * • 69 x 110 x h160 180
Di 60 A (Ax) 60 3.30 - 4.30 AD-T IP44 • • 69 x 110 x h160 212
Si 120 A (Ax) 120 3.30 - 4.30 AD-T IP44 * • 151 x 114 x h206 361
Di 120 A (Ax) 120 3.30 - 4.30 AD-T IP44 • • 151 x 114 x h206 393
Si 160 A (Ax) 160 3.30 - 4.30 AD-T IP44 * • 151 x 120 x h210 433
Di 160 A (Ax) 160 3.30 - 4.30 AD-T IP44 • • 151 x 120 x h210 465
               
S  60 A (Ax) 60 3.30 - 4.30 Atex II2G IIA T3 to T2 * • 90 x 130 x h165 308
D 60 A (Ax) 60 3.30 - 4.30 Atex II2G IIA T3 to T2 • • 90 x 130 x h165 340
S  120 Ax 120 3.30 - 4.30 Atex II2G IIA T3 to T2 * • 118 x 152 x h203 502
D 120 Ax 120 3.30 - 4.30 Atex II2G IIA T3 to T2 • • 118 x 152 x h203 534
S 230 Ax 230 3.30 - 4.30 Atex II3G IIA T3 to T2 * • 150 x 180 x h245 968
D 230 Ax 230 3.30 - 4.30 Atex II3G IIA T3 to T2 • • 150 x 180 x h245 1000
230/400 Volt - 50/60 Hz - Built according norms CEE 89/392 - 91/368 - CEI 64-2 - EN 50 014/015/018

* In the Countries where it is allowed by the existing norms and respecting the particular conditions of installation and use
FORMECO reserves itself the right to bring modifications without advising
Go back to Solvent Recovery Systems